Memoli ETM-H 50
ETM-H სერიის ნახევრად ავტომატური ჰიბრიდული მილსაღუნი დანადგარები იდეალურია თხელი მილების დასამუშავებლად დასამუშავებელი მილის დეფორმაციის გარეშე: კომპაქტური, მაღალმწარმოებლური და ეკონომიური გადაწყვეტა.
In semi-automatic bending machines of the ETM-H series, the bending function is performed automatically, while the feeding and rotation of the tube between the bends must be performed manually.
Simplicity, sturdiness and precision are the key features of this particularly cost-effective line.
These tube bending machines are particularly used for the production of small to medium batches, for prototyping, and for adaptation and maintenance work.
In tube processing with multiple bends, the positioner will greatly facilitate your work; in fact, this device through its system of stops allows the exact fixing of the tube length and rotation position between bends, ensuring an excellent degree of repeatability.
As standard supply, this electric bending machine is equipped with a hydraulic mandrel extractor, hydraulic clamp die and pressure die, thus ensuring an excellent quality bend finish.
Our ETM-H semi-automatic hybrid bending machines can bend tubes with a diameter up to 50 mm diameter with maximum quality of finishing, with a minimum bending radius of 1 x the tube diameter.
Extremely easy and fast to use thanks to the “Digital Bend Programming Touch Screen 2”, the software specially created for our machines is able to select as many as 100 programs with 10 bending angles each and with automatic correction of the springback.
In addition, the projects you make will be saved and programmed as repeatable.
Maximum capacity (mm)
| MATERIAL | ETM-H 50 |
|---|---|
| Fe 430 | 50 x 2,5 |
| ALU | 60 x 4 |
| INOX AISI 304 | 50 x 1,5 |
| SQUARE PIPE | 40 x 2,5 |
 |