Slitting shears
Power tools:
Cordless tooling
TRUMPF TruTool C 200 18V LiHD rechargeable battery
Exceptionally strong slitting shears with open and robust steel cutting head. For even more specialization due to different cutting blades.
Maximum sheet thicknesses
- spiral duct steel 600 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.75 mm
Maximum sheet thicknesses
- spiral duct steel 600 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.75 mm
Wired tooling
TRUMPF TruTool C 250 with chip clipper
The most powerful slitting shears. You can use the chip clipper with just one hand to cut chips at any location. Ideal for interior cutouts and notches.
Maximum sheet thicknesses
- steel 400 N/mm² - 2.5 mm
- steel 600 N/mm² - 1.5 mm
- aluminium up to 250 N/mm² - 3 mm
- spiral duct steel 400 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.6 mm
Maximum sheet thicknesses
- steel 400 N/mm² - 2.5 mm
- steel 600 N/mm² - 1.5 mm
- aluminium up to 250 N/mm² - 3 mm
- spiral duct steel 400 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.6 mm
Cordless tooling
TRUMPF TruTool C 160 chip clipper, 12V LiHD rechargeable battery
Maneuverable battery-powered slitting shears with long battery life and chip clipper for two-handed operation. Ideal for interior cutouts and notches.
Maximum sheet thicknesses
- steel 400 N/mm² - 1.6 mm
- steel 600 N/mm² - 1.2 mm
- aluminium up to 250 N/mm² - 2 mm
- spiral duct steel 600 N/mm² - 4 x 0.75 mm
Maximum sheet thicknesses
- steel 400 N/mm² - 1.6 mm
- steel 600 N/mm² - 1.2 mm
- aluminium up to 250 N/mm² - 2 mm
- spiral duct steel 600 N/mm² - 4 x 0.75 mm
Cordless tooling
TRUMPF TruTool C 160 12V LiHD rechargeable battery
Handy cordless slitting shears without chip clipper, offering excellent performance on curves. Ideal for cutting straight sheets to length and for curved cuts.
Maximum sheet thicknesses
- steel 400 N/mm² - 1.6 mm
- steel 600 N/mm² - 1.2 mm
- aluminium up to 250 N/mm² - 2 mm
- spiral duct steel 600 N/mm² - 4 x 0.75 mm
Maximum sheet thicknesses
- steel 400 N/mm² - 1.6 mm
- steel 600 N/mm² - 1.2 mm
- aluminium up to 250 N/mm² - 2 mm
- spiral duct steel 600 N/mm² - 4 x 0.75 mm
Cordless tooling
TRUMPF TruTool C 250 with chip clipper, 18V LiHD rechargeable battery
You can now cut sheet thicknesses of 2.5 mm cordlessly. Single-handed operation enables easy cutting of the chip at the touch of a button.
Maximum sheet thicknesses
- steel 400 N/mm² - 2.5 mm
- steel 600 N/mm² - 1.5 mm
- aluminium up to 250 N/mm² - 3 mm
- spiral duct steel 400 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.6 mm
Maximum sheet thicknesses
- steel 400 N/mm² - 2.5 mm
- steel 600 N/mm² - 1.5 mm
- aluminium up to 250 N/mm² - 3 mm
- spiral duct steel 400 N/mm² - 4 x 0.9 mm
- spiral duct steel 600 N/mm² - 4 x 0.6 mm