Electric bending press ETM 150

Our ETM 150 rotary draw bending  machine is equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction using dedicated toolings. It allows to bend tubes with a range diameter up to 168 x 7 mm and it can make curves over 180° with top finish quality for a minimum bending radius of 3x the tube diameter.

This machine is manufactured from single steel block and the toolings are machined from solid steel. It can also have the option of fitting hydraulic vice and positioner.

The system of counter-die is specifically designed to reduce mechanical effort and to make the bending operation faster than other brands machines of the same category, thus granting a very good finishing even when bending very thin wall thicknesses.
 

ETM ROTARY DRAW BENDER SOFTWARE

 

Every ETM series machine is supplied with the Digital Bend Programming Touch Screen 2 special software, extremely easy to use  due to the intuitive “Touch” screen.

Thanks to the latest generation technologies it is possible to access main features as:

  • Storage of 49 programs, each of them with a 8-stop sequences in the bending operation
  • Calculation of the machine maximum bending capacities with reference to the material size to be bent
  • Graphic of the minimum bending radii
  • Setting of springiness material estimate (springback)
  • Bend counter
  • Remote connection “Industry 4.0”

Some more functions:

  • Working mode: either manual or automatic
  • 100 MB hard disk
  • Alarm diagnosis
  • Maintenance notice

SPECIFICATION ETM 150
Motor power KW 12
Rotation speed * 0,5 g/1' *
Gears Oil-bath
Wieght 2500 kg
Size 1700 x 1400 x 1600 h.
 

Maximum capacity (mm)

MATERIAL ETM 150
FE 430 168 x 7
Aluminium 168 x 10
INOX AISI 304 168 x 5,5
Solid Bar FE 430 110
Square Tube FE 140 x 6

 

Order a call

Full Name: *

Phone: *