EMC Mercury M650
For small- and medium-scale manufacturing. Meant for grinding, edge rounding, deburring, deslagging, calamine removal, and finishing processing of metal parts. From 1 to 3 working units with different configurations.
Main parameters
- Number of working units – 1-3 pc.
- Working width – 650 mm.
- Working thickness – 0,5-150 mm.
- Work table height – 800-950 mm (adjustable).
- Total work table load – 250 kg.
- Electronic controls via Touch Screen Display 7".
- Internal independent motors.
- Internal vacuum device.
- Feed belt inverter.
- Electronic motorized roller pressure adjustment “Grit-set”.
- Brushes for panel/feed belt cleaning and double external brush unit.
- Table rollers and table extensions.
Types of processing
- Dry processing.
- Grinding.
- Deslagging.
- Deburring.
- Edge rounding.
- Calamine removal.
- Surface finishing.
| Working unit - Roller Group (R) | |
| Abrasive belt length | 1900 mm |
| Roller diameter | Ø125 mm |
| Motor power | 7,5-15 kW |
| Inverter for variable belt speed | from 3 to 21 m/s |
| Working unit - Discs Group Internal (h, H, Q) |
| The parameters are selected on the basis of production objectives. |
| Working unit - Brush Group (B) |
| The parameters are selected on the basis of production objectives. |
| Touch Screen Display 7" | |
| Connection | USB, RS232, Ethernet 10/100/1000 |
| Memory capacity | up to 300 working programs |
| Automatic motor start sequence | |
| Command, programming and display of all electronic functions | |
| Report display and alarm reset (self-diagnostic) with memory records |
| Vacuum device inside the machine |
| The vacuum device is placed below, inside the machine frame, to ensure optimal vacuuming and decrease noise. |
Electronic motorized roller pressure adjustment "Grit Set"